Effluent Treatment Plant Chemicals

Approx. Rs 75 / KgGet Latest Price

Defoamer Antifoaming Agent is a water-based jelly from high molecular fatty acids mainly and highly active chemical specially formulated to reduce foam level.

It is mainly used for defoaming the process water & effluent plant where foam is copious and uncontrollable.

In process water & effluent treatment plant foam may be formed from Organic originated or inorganic originated, product reduces the foam within 2 to 3 minutes.  By reducing the surface tension of waste water thereby adherence of bubble on the surface of water is reduced and entrapped air is released to open air or environment.

2 gms. of paste add 20 drops of 40% W/v Potassium hydroxide add 2 ml of Glycerine Mixed well in test tube.  Mixture is boiled for five minutes.  Cool to room temperature.  To above solution add Sodium Chloride saturated solution.  Soap will float on the surface.

Dosage & Feeding:

GES 2015 Dosage for Process & ET Plants to subside the foam we recommended 200 gms. per 10000 ltrs. capacity.  Our product directly added to the Process tank & Aeration tank dilution with water.  If foam concentration is high or elevated dose may be by extra 100 gms., subsequently.  Application & dosage can be determined by taking industrial trials. 

Compatibility :

• GES 2015 is compatible with almost all products used in process & effluent water treatment program.

Handling:

• Avoid contact with eye or prolonged contact with skin. Do not take internally.

Packing :

• GES 2015 is available in 35 and 50 kgs.

Approx. Rs 80 / KilogramGet Latest Price

We "Geo Enviro Solution" is a leadin Manufacturer of Defoamer or Antioaming agent. A Defoamer Antifoaming Agent is a chemical additive that reduces and hinders the formation of foam in industrial processliquids. The terms anti-foam agent and defoamer are often used interchangeably. Commonly used agents are insoluble oils, polydimethylsiloxanes and other silicones, certain alcohols, stearates and glycols. The additive is used to prevent formation of foam or is added to break a foam already formed.

In industrial processes, foams pose serious problems. They cause defects on surface coatings. They prevent the efficient filling of containers. A variety of chemical formulae are available to prevent formation of foams.

Our Range o products are best in quality & economic in price.

Approx. Rs 750 / KilogramGet Latest Price

We "Geo Enviro Solution" is a leading supplier of Bio Culture Chemical for ETP & STP. It is a source of phosphorus and potassium. It is also a buffering agent. When used in fertilizer mixtures with urea and ammonium phosphates, it minimizes escape of ammonia by keeping the ph at a relatively low level.

Features:

• Enhanced BOD and COD removal
• Builds up MLSS level
• Rapid start-up following initializing and reseeding
• Rapid recovery-following shock loading
• Reduction in filamentation and bulking
• Reduction in sludge volume
• Contains micro-nutrients for the growth of bacteria
• Non-foaming and easy to handle
• Organic Waste + GES SS-28 + O2 = New Cells + CO2+H2O+Energy

Approx. Rs 18,000 / Metric TonGet Latest Price

Approx. Rs 26,000 / Metric TonGet Latest Price

We "Geo Enviro Solution" is a leading Manufacturer / Trader of Poly Aluminium Chloride in both Liquid as well as powder form. Our Product specifications are mentioned below

It is used in Drinking Water Plant, Waste Water Treatment Plant etc.

Approx. Rs 20 / KgGet Latest Price

We "Geo Enviro Solution" is a manufacturer / Trader for Non Ferric Alum & we are supplying to world wide. Our Product is best in quality & economic in price. Specification of our product is mentioned below. We are one of the most reputed firms involved in offering a comprehensive range Non Ferric Alum. It is also used in purification of drinking water in industries. They are soluble in water have an astringent acid, sweetish taste, react acid to litmus. Our product range is procured in compliance with variegated demands and needs of our client base. These are available at a cost effective price in the market.

Specification:
20317% MINPH OF 5% SOL.2.8 MINInsoluble MATTER0. 3 % MAXIRON CONTENT AS FE100 PPM MAX OR 0.01% MAX

Applications :
The use of Alum, Ferric chloride and Ferrous sulphate as coagulants in removing suspended solids, colour and COD from semi-aerobic landfill leachate at controlled pH Pulp & Paper Application Removal of Arsenic Fluoride from Drinking Water With Cake Alum and a Polymeric Anionic Flocculent Use of Ferric Ammonium Sulfate in Serum Cholesterol Determination.

Approx. Rs 12,000 / Metric TonGet Latest Price

Approx. Rs 6,500 / TonGet Latest Price

Poly Aluminium Chloride Liquid 10%

Approx. Rs 90 / KgGet Latest Price

We are invention new range of GES DÉCOR - EC Cationic (color removal Chemicals based flocculent), which is a color value removal from waste water generated from various Industries like Textiles Industries, Dyes & Intermediates Industries, Paint Industries, Rubber Industries, Marble Industries. It is high molecular weight polymeric coagulant.

The colored effluents, generated by the industries, when left untreated, play havoc with reusable water resources. For process houses, in water scarce areas, it comes as a heaven-sent facilitating recycling of the industrial effluent into process water.

Method Of Application:
The product shall be diluted with 10 times water and then dosed into the waste water directly after being mixed for several minutes. It can be precipitated or air floated to become clear water.

The pH value of the waste water should be adjusted to 7-10 by for better results.

When the color and COD are relatively high, it can be used with the help of PAC but do not mixed together.  In this way, treatment process of the waste water directly.

After the process, it can be added 1-2 ppm settling agent anionic polyelectrolyte (Jelly Form or Powder form) it would be settled particles of waste water quickly.

After the process, COD of waste water is reduced by 50-60% and color value 90% removed from Effluent water at the primary stage.

Application:

• Industrial Waste Water Treatment
• Primary Clarification
• Secondary & Tertiary Treatment
• Sludge thickening
• Sludge dewatering
• Color removal
• Deviling
• Dissolved air floatation
• Sewage Treatment
• Primary Treatment
• Sludge thickening
• Sludge dewatering

Polymer Feed System:

Preparation of solution:
Stock solution of polyelectrolyte may expediently be prepared at a concentration of 0.1% and ideally diluted to 1% while dosing. It is freely soluble in water and mild agitations enough for a uniform solution in a short time.

Feeding of the solution:
A positive displacement pump is recommended for feeding Polyelectrolyte  solution into the water stream at a point where maximum turbulence is available so that through mixing and good contact with dispersed particles are ensured

Dosage :
Trial can be decided at the time of plant scale.  Lab Scale trail is adequate.

Advantages:

• Ease of application because it is a liquid form
• You can apply it alone or in conjunction with other polymers and metal sulphates.
• Non corrosive of suggested dosage, economical and effective at low level.
• Can eliminate the use of alum & further ferric salts when used as primary coagulants.
• It can be cost effective chemicals

Additional Information:

• Item Code: GES-DECOR-EC

Approx. Rs 150 / KilogramGet Latest Price

We "Geo Enviro Solution" is a leading supplier of Organic Micro Nutrients for Effluent Treatment Plant & Sewage Treatment Plant. Organic Micro Nutrient are designed to be used as a foliar spray to prevent or correct micronutrient deficiencies in plants as indicated by visual inspection of leaf or fruit, leaf analysis or soil testing. The most common indicator of micronutrient deficiency is yellowing leaves.

Features:

• Enhanced BOD and COD removal
• Builds up Biomass level
• Reduction in imbalance in the FM ratio
• No need for Urea and DAP addition
• Helps to reduce foaming
• Easy to handle
• Eco friendly natural product
• Reduces Cow-dung addition
• Can be used for cultivation

Optimum dosage varies with system operating conditions, influent characteristics and load. However the general dosage is 5.0-20 ppm on the quantity of effluent treated per day.

Approx. Rs 450 / KgGet Latest Price

• Secondary & Tertiary Treatment
• Sludge thickening 
• Sludge dewatering
• Color removal
• Deviling 
• Dissolved air floatation Sewage Treatment
• Primary Treatment
• Sludge thickening 
• Sludge dewatering Process Industries Paper Making Retention & Drainage Sugar Manufacturing Mud Settling Chlor-alkali Brine clarification Thermal Power Clarification of scrubber water Mining & Metallurgy Tailings thickening and water recovery Coal Tailings thickening and water recovery Petroleum Drilling fluids, EOR, Profile Modification Raw Water Treatment 

• Dewatering of lime alum sludge and recovery of water Common Grades Brand GES CPE (POLYELECTROLYTE POWDER FORM) Major Contents
• Polyacrylamide Ionicity 
• Cationic Shape 
• Dosage Recommended dosage is 0.2 - 0.5% depending on usage conditions and level of turbidity. 

Approx. Rs 320 / KgGet Latest Price

High molecular weight flocculants are capable of promoting flocculation by neutralizing the superficial electric charges of sludge particles in the water and un-stabilizing each individual particles. The particles then are absorbed by the activated functional group in the flocculent polymer.

Product Characteristics:

• Superior flock formation
• Major effects yielded with limited use
• Superior cleaning performance
• Use over a broad pH range
• Combined use with inorganic flocculants heightens superior treatment effects

Dosage:

• Recommended dosage is 0.2 - 0.5% depending on usage conditions and level of turbidity.

Packing:

• 10 kg paper bags or 25 kg in poly bags 50 kg/ 200 kg in HDPE drums

Approx. Rs 350 / KgGet Latest Price

We Geo Enviro Solution supply "Citric Acid" in Bulk Quantity. And we are much concentrated on Quality of the product & satisfy our customer needs. Customet Satisfaction is our main goal.

Applications:
The dominant use of citric acid is as a flavoring and preservative in food and beverages, especially soft drinks. Within the European Union it is denoted by E number E330. Citrate salts of various metals are used to deliver those minerals in a biologically available form in many dietary supplements. The buffering properties of citrates are used to control pH in household cleaners and pharmaceuticals. In the United States the purity requirements for citric acid as a food additive are defined by the Food Chemicals Codex, which is published by the United States Pharmacopoeia (USP).

Foods, other:
Citric acid can be added to ice cream as an emulsifying agent to keep fats from separating, to caramel to prevent sucrose crystallization, or to recipes in place of fresh lemon juice. Citric acid is used with sodium bicarbonate in a wide range of effervescent formulae, both for ingestion (e.g., powders and tablets) and for personal care (e.g., bath salts, bath bombs, and cleaning of grease). Citric acid is also often used in cleaning products and sodas or fizzy drinks.Citric acid sold in a dry powdered form is commonly sold in markets and groceries as "sour salt", due to its physical resemblance to table salt. It has use in culinary applications where an acid is needed for either its chemical properties or for its sour flavor, but a dry ingredient is needed and additional flavors are unwanted (e.g., instead of vinegar or lemon juice).

Cleaning and chelating agent:
Citric acid is an excellent chelating agent, binding metals. It is used to remove limescale from boilers and evaporators. It can be used to soften water, which makes it useful in soaps and laundry detergents. By chelating the metals in hard water, it lets these cleaners produce foam and work better without need for water softening. Citric acid is the active ingredient in some bathroom and kitchen cleaning solutions. A solution with a 6% concentration of citric acid will remove hard water stains from glass without scrubbing. In industry, it is used to dissolve rust from steel. Citric acid can be used in shampoo to wash out wax and coloring from the hair.

Illustrative of its chelating abilities, citric acid was the first successful eluant used for total ion-exchange separation of the lanthanides, during the Manhattan Project in the 1940s. In the 1950s, it was replaced by the far more efficient EDTA. It can be used to slow setting of Portland cement. It can delay setting time substantially.

Cosmetics and pharmaceuticals:
Citric acid is widely used as a pH adjusting agent in creams and gels of all kinds. In this role, it is classified in most jurisdictions as a processing aid and so does not need to be listed on ingredient lists.Citric acid is an alpha hydroxy acid and used as an active ingredient in chemical peels.Citric acid is commonly used as a buffer to increase the solubility of brown . Single-use citric acid sachets have been used as an inducement to get users to exchange their dirty needles for clean needles in an attempt to decrease the spread of AIDS and hepatitis. Other acidifiers used for brown are ascorbic acid, acetic acid, and lactic acid; in their absence, a drug user will often substitute lemon juice or vinegar. Citric acid is used as one of the active ingredients in the production of antiviral tissues.

Dyeing:
Citric acid can be used in food coloring to balance the pH level of a normally basic dye. It is used as an odorless alternative to white vinegar for home dyeing with acid dyes.

Industrial and construction:
Citric acid can be used as a successful alternative to nitric acid in passivation of stainless steel.

Approx. Rs 75 / KilogramGet Latest Price

We offer Best in Quality EDTA. EDTA (ethylenediaminetetraacetic acid) is an amino acid compound, a powerful chelating agent - meaning it attaches to plaque build up and heavy metals and removes them naturally from the body. EDTA is recognized by the body and easily assimilated

EDTA is one of the most powerful metal chelators known. However, EDTA has become a commonly known name. There are actually many forms and chemical formulas for the same basic product called EDTA. All are formulated to remove metals, but for different purposes. Industrial Grade EDTA is used in batteries and for other practical purposes. Food Grade EDTA is used to protect us to some degree from harmful metals that find their way into the foods we eat. The sodium and calcium salts of EDTA (ethylenediaminetetraacetic acid) are common sequestrants in many kinds of foods and beverages.

And Pharmaceutical Grade EDTA is used in the best chelation products for its primary function, that of removing unwanted metals (in particular Calcium, Mercury, Lead, Cadmium & Arsenic) from the body's organs and cardiovascular system.

Uses:

In industry, EDTA is mainly used to sequester metal ions in aqueous solution. In the textile industry, it prevents metal ion impurities from modifying colours of dyed products. In the pulp and paper industry, EDTA inhibits the ability of metal ions, especially Mn2+, from catalyzing the disproportionation of hydrogen peroxide, which is used in "chlorine-free bleaching." In a similar manner, EDTA is added to some food as a preservative or stabilizer to prevent catalytic oxidative decoloration, which is catalyzed by metal ions. In soft drinks containing ascorbic acid and sodium benzoate, EDTA mitigates formation of benzene (a carcinogen)

The reduction of water hardness in laundry applications and the dissolution of scale in boilers both rely on EDTA and related complexants to bind Ca2+, Mg2+, as well as other metal ions. Once bound to EDTA, these metal centers tend not to form precipitates or to interfere with the action of the soaps and detergents. For similar reasons, cleaning solutions often contain EDTA.

The solubilization of ferric ions near neutral pH is accomplished using EDTA. This property is useful in agriculture including hydroponics, especially in calcareous soils. Otherwise, at near-neutral pH, iron(III) forms insoluble salts, which are less bioavailable. Aqueous [Fe(edta)]- is used for removing ("scrubbing") hydrogen sulfide from gas streams. This conversion is achieved by oxidizing the hydrogen sulfur to elemental sulfur, which is non-volatile:

2 [Fe(edta)]- + H2S → 2 [Fe(edta)]2− + S + 2 H+

In this application, the ferric center is reduced to its ferrous derivative, which can then be reoxidized by air. In similar manner, nitrogen oxides are removed from gas streams using [Fe(edta)]2-. The oxidizing properties of [Fe(edta)]- are also exploited in photography, where it is used to solubilize silver particles.

EDTA was used in the separation of the lanthanide metals by ion-exchange chromatography. Perfected by F.H. Spedding et al. in 1954, the method relies on the steady increase in stability constant of the lanthanide EDTA complexes with atomic number. Using sulfonated polystyrene beads and copper(II) as a retaining ion, EDTA causes the lanthanides to migrate down the column of resin while separating into bands of pure lanthanide. The lanthanides elute in order of decreasing atomic number. Due to the expense of this method, relative to counter-current solvent extraction, ion-exchange is now used only to obtain the highest purities of lanthanide (typically greater than 4N, 99.99%)