Approx. Rs 42,000 / PieceGet Latest Price
Product BrochureProduct Details:Minimum Order Quantity | 5 Piece |
Usage/Application | RO Plant |
Brand | Hydranautics |
Diameter | 8 Inch |
Capacity | 1000 LPH |
Length | 40 Inch |
Membrane Material | Cellulose Acetate |
Model | SWC5 LD 8040 |
Salt Rejection | 99.8% (99.7% minimum) |
As the world is facing freshwater scarcity, Hydranautics brings a range of SWC RO membranes to meet the demands of desalination industry. SWC membranes have improved the productivity and salt rejection for more than two decades while reducing their environmental impact. SWC membranes come in a range of innovative formulations depending on the level of seawater salinity required.
SWC membranes come in a range of innovative formulations suitable for varying degrees of seawater salinity. Each offers the highest productivity and salt rejection rates in the industry combined with the optimized flow, low fouling and low energy consumption.
This exceptional performance and consistency creates demand for SWC membranes in seawater desalination and high TDS industrial waste water treatment applications, including conventional and hybrid designs.
SWC5 membranes are designed to provide optimum salt rejection and permeate flows. They are the membranes of choice when lower permeate TDS and lower feed pressures are needed. SWC5 membranes offer highest energy efficiency at lowest costs and are used in the mega desalination plants.
Delivering consistent high quality outputs at lower fouling, SWC5-LD provides high flow, and excellent salt and boron rejections at low operating pressures.
SWC5-LD membranes use patented Low Differential LD™ technology designed to minimize colloidal fouling. They use a patented 34 mil thickness feed spacer that prevents colloidal fouling and increases the effectiveness of membrane cleaning.
As a result, the SWC5-LD membrane does not need to be cleaned frequently – thus reducing treatment cost – while offering extreme durability and consistent performance.
With an increased active surface area, SWC5 MAX provides exceptional salt rejection and high energy efficiency.
SWC5-LD membranes are available in 4.0 and 8.0 inches, SWC5 MAX membranes in 8.0 inch and SWC5 membranes in 16 inch diameters.
Additional Information:
Approx. Rs 11,800 / PieceGet Latest Price
Product BrochureProduct Details:Usage/Application | RO Plant |
Diameter | 4 Inch |
Brand | Hydranautics |
Capacity | 250 LPH |
Length | 40 Inch |
Membrane Material | Cellulose Acetate |
Model | CPA2-4040 |
Installation Service | Yes |
Permeate Flow | 2,250 gpd (8.5 m3/d) |
Salt Rejection | 99.5% (99.2% minimum) |
Operating Temperature | 77 Deg F (25 Deg C) |
pH Range | 6.5 - 7.0 |
Ultrapure water is essential in several industrial applications. CPA RO membranes are regarded as the industry standard for all critical high purity applications – from pharmaceutical to power industry.
CPA lines of spiral-wound RO membranes are available in a variety of sizes and deliver unmatched performance with the highest salt rejection rates for brackish water applications. High throughput, efficiency and cost-effectiveness make CPA membranes the best high-rejection brackish water RO membranes in the industry.
Because of its exceptionally high salt rejection, CPA membranes are used in power generation, pharmaceutical, electronics and semiconductor industry.
CPA2 is the second generation CPA high rejection brackish water RO membrane introduced in the early 1990’s. This membrane with 365 square feet of membrane area and 99.7% rejection remains popular today as a robust work-horse product for Hydranautics.
CPA2 is popularly used in the treatment of brackish waters to produce low TDS permeate.
CPA2 membrane is available in diameters of 4.0 and 8.0 inches.
Additional Information:
Approx. Rs 29,000 / PieceGet Latest Price
Product BrochureProduct Details:Usage/Application | RO Plant |
Diameter | 8 Inch |
Brand | Hydranautics |
Capacity | 1000 LPH |
Length | 40 Inch |
Membrane Material | Cellulose Acetate |
Model | CPA2 8040 |
Permeate Flow | 10,000 gpd (37.9 m3/d) |
Salt Rejection | 99.7% (99.5% minimum) |
Operating Temperature | 77 Deg F (25 Deg C) |
pH Range | 6.5 - 7.0 |
Ultrapure water is essential in several industrial applications. CPA RO membranes are regarded as the industry standard for all critical high purity applications – from pharmaceutical to power industry.
CPA lines of spiral-wound RO membranes are available in a variety of sizes and deliver unmatched performance with the highest salt rejection rates for brackish water applications. High throughput, efficiency and cost-effectiveness make CPA membranes the best high-rejection brackish water RO membranes in the industry.
Because of its exceptionally high salt rejection, CPA membranes are used in power generation, pharmaceutical, electronics and semiconductor industry.
CPA2 is the second generation CPA high rejection brackish water RO membrane introduced in the early 1990’s. This membrane with 365 square feet of membrane area and 99.7% rejection remains popular today as a robust work-horse product for Hydranautics.
CPA2 is popularly used in the treatment of brackish waters to produce low TDS permeate.
CPA2 membrane is available in diameters of 4.0 and 8.0 inches.
Additional Information:
Approx. Rs 29,500 / PieceGet Latest Price
Product BrochureProduct Details:Model Name/Number | CPA3 |
Automation Grade | Automatic |
Salt Rejection | 99.7% (99.6% minimum) |
Brand | Hydranautics |
Permeate Flow | 11,000 gpd (41.6 m3/d) |
Membrane Active Area | 400 ft2 (37.1 m2) |
Feed Spacer | 31 mil (0.787mm) |
Membrane Polymer | Composite Polyamide |
Operating Temperature | 77 Deg F (25 Deg C) |
pH Range | 6.5 - 7.0 |
Ultrapure water is essential in several industrial applications. CPA RO membranes are regarded as the industry standard for all critical high purity applications – from pharmaceutical to power industry.
CPA lines of spiral-wound RO membranes are available in a variety of sizes and deliver unmatched performance with the highest salt rejection rates for brackish water applications. High throughput, efficiency and cost-effectiveness make CPA membranes the best high-rejection brackish water RO membranes in the industry.
Because of its exceptionally high salt rejection, CPA membranes are used in power generation, pharmaceutical, electronics and semiconductor industry.
CPA3 is the third generation CPA high rejection brackish water RO membrane introduced in the late 1990’s. This membrane at 99.7% rejection is an upgrade to the CPA2 with 10% more membrane area (400 square feet). This resulted in reduced capital costs by requiring fewer pressure vessels and less floor space.
CPA3 membranes also have a thicker (31 mil) feed spacer that exhibits higher tolerance to feed water suspended solids.
CPA3 membrane is available in diameters of 8.0 inches.
Additional Information:
Approx. Rs 32,000 / PieceGet Latest Price
Product BrochureProduct Details:Usage/Application | RO Plant |
Diameter | 8 Inch |
Brand | Hydranautics |
Capacity | 1000 LPH |
Length | 40 Inch |
Membrane Material | Cellulose Acetate |
Model | CPA5 LD 8040 |
Permeate Flow | 11,000 gpd (41.6 m3/d) |
Salt Rejection | 99.7% (99.6% minimum) |
Operating Temperature | 77 Deg F (25 Deg C) |
pH Range | 6.5 - 7.0 |
Setting the industry standard for the highest salt rejection rates
Ultrapure water is essential in several industrial applications. CPA RO membranes are regarded as the industry standard for all critical high purity applications – from pharmaceutical to power industry.
CPA lines of spiral-wound RO membranes are available in a variety of sizes and deliver unmatched performance with the highest salt rejection rates for brackish water applications. High throughput, efficiency and cost-effectiveness make CPA membranes the best high-rejection brackish water RO membranes in the industry.
Because of its exceptionally high salt rejection, CPA membranes are used in power generation, pharmaceutical, electronics and semiconductor industry.
CPA5-LD is the fourth generation CPA high rejection brackish water RO membrane. This 400 sq. ft. membrane with 99.7% rejection was an upgrade to the CPA3 membrane as it is designed with Low Differential Pressure LDTM. It offers the improved rejection of all ions including silica and nitrates.
CPA5-LD membranes use a patented 34 mil thickness feed spacer that increases effectiveness of membrane cleaning.
As a result, the CPA5-LD membrane does not need to be cleaned frequently – thus reducing treatment cost – while offering extreme durability and consistent performance.
CPA5-MAX membranes have 440 square feet of membrane area and are well suited for polishing RO and low fouling applications. This increased membrane area can reduce capital costs by requiring fewer pressure vessels and less floor space.
CPA5-LD membrane is available in diameters of 4.0 and 8.0 inches and the CPA5-MAX membrane is available in 8.0 inch diameter.
Additional Information:
Approx. Rs 17,500 / PieceGet Latest Price
Product BrochureProduct Details:Minimum Order Quantity | 5 Piece |
Usage/Application | RO Plant |
Diameter | 4 Inch |
Brand | Hydranautics |
Capacity | 250 LPH |
Length | 40 Inch |
Membrane Material | Cellulose Acetate |
Model | SWC5-LD-4040 |
Applied Pressure | 800 psi (5.5 MPa) |
Permeate Flow | 1,750 gpd (6.62 m3/d) |
Salt Rejection | 99.7% (99.5% minimum) |
Operating Temperature | 77 Deg F (25 Deg C) |
pH Range | 6.5 - 7.0 |
As the world is facing freshwater scarcity, Hydranautics brings a range of SWC RO membranes to meet the demands of desalination industry. SWC membranes have improved the productivity and salt rejection for more than two decades while reducing their environmental impact. SWC membranes come in a range of innovative formulations depending on the level of seawater salinity required.
SWC membranes come in a range of innovative formulations suitable for varying degrees of seawater salinity. Each offers the highest productivity and salt rejection rates in the industry combined with the optimized flow, low fouling and low energy consumption.
This exceptional performance and consistency creates demand for SWC membranes in seawater desalination and high TDS industrial waste water treatment applications, including conventional and hybrid designs.
SWC5 membranes are designed to provide optimum salt rejection and permeate flows. They are the membranes of choice when lower permeate TDS and lower feed pressures are needed. SWC5 membranes offer highest energy efficiency at lowest costs and are used in the mega desalination plants.
Delivering consistent high quality outputs at lower fouling, SWC5-LD provides high flow, and excellent salt and boron rejections at low operating pressures.
SWC5-LD membranes use patented Low Differential LD™ technology designed to minimize colloidal fouling. They use a patented 34 mil thickness feed spacer that prevents colloidal fouling and increases the effectiveness of membrane cleaning.
As a result, the SWC5-LD membrane does not need to be cleaned frequently – thus reducing treatment cost – while offering extreme durability and consistent performance.
With an increased active surface area, SWC5 MAX provides exceptional salt rejection and high energy efficiency.
SWC5-LD membranes are available in 4.0 and 8.0 inches, SWC5 MAX membranes in 8.0 inch and SWC5 membranes in 16 inch diameters.
Additional Information:
Explore More Products
© Geo Enviro Solution. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited